REDONDO BEACH, Calif., Oct. 8, 2010 -- NASA's James Webb Space Telescope continues to make significant progress, successfully completing a series of sunshield vent tests that validate the telescope's sunshield design. Northrop Grumman Corporation (NYSE:NOC) is leading Webb's design and development effort for the space agency's Goddard Space Flight Center. Tests were conducted the last week of August in vacuum chambers at Northrop Grumman Aerospace Systems' Redondo Beach facility.
"This is another significant risk reduction activity that continues to move sunshield development forward," said Scott Willoughby, Webb Telescope program manager for Northrop Grumman Aerospace Systems. "We have demonstrated the effectiveness of our sunshield vent design and will use these test results to validate our analytical models in the next few months."
"While adequate venting is a design consideration for all spaceflight hardware, this was a particularly unique challenge for the sunshield given the large volume of trapped air in the membrane system at launch," said Keith Parrish, Webb telescope sunshield manager at NASA's Goddard Space Flight Center in Greenbelt, Md. "From the beginning of its development, venting features have been a critical part of the overall sunshield design. Since we cannot vent-test the actual flight article, these tests have shown the design works and the sunshield will vent safely on its way to orbit."
Three critical full-scale sections of the sunshield were tested: the section on top of the spacecraft around the tower that supports the telescope; the vertical pallet structure that contains the folded sunshield membranes, and the intervening four-bar linkage area that is folded in an inverted V-shape. The flow paths are complex and the sunshield material, a tough plastic film, Kapton ®E, is only one- to two-thousandths of an inch thick and covers a surface area the size of a tennis court. Another series of complementary tests slated for October will inject air into the stowed sunshield test article and provide more detailed data used in evaluating analytical models.
The Webb Telescope's sunshield is a five-layer structure the size of a tennis court. Each of the five membrane layers is about as thick as a human hair (one to two-thousands of an inch thick). The layers are separated from each other and held in place by spreader bars and deployable booms. The sunshield will absorb and deflect solar light to keep the telescope operating at cryogenic temperatures so infrared sensors can see into the most distant galaxies.
The James Webb Space Telescope is the world's next-generation space observatory and successor to the Hubble Space Telescope. The most powerful space telescope ever built, Webb will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and see unexplored planets around distant stars. The Webb Telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.
Northrop Grumman Corporation is a leading global security company whose 120,000 employees provide innovative systems, products, and solutions in aerospace, electronics, information systems, shipbuilding and technical services to government and commercial customers worldwide. Please visit www.northropgrumman.com for more information.
CONTACT: Mary Blake Northrop Grumman 310.812.6291 (o) 424-254-6170 (m) firstname.lastname@example.org Lynn Chandler NASA Goddard Space Flight Center 301-286-2806 Lynn.email@example.com Greenbelt, Md.